Site Information

loader Loading... Please wait...

Edwards E2M28 Dual Stage Vacuum Pump 115V/200-230V 50/60Hz NEW

$6,281.00 $4,750.00
(You save $1,531.00)
SKU:
EDE2M28
Availability:
Ships in 2-3 business days.
Shipping:
$150.00 (Fixed shipping cost)
Quantity:

Product Description

Overview

The EM range of oil-sealed rotary pumps - renowned for its high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - has become the industry standard laboratory and light industrial applications. 
The E2M28 pump is a two-stage, direct drive, sliding vane pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor. 

Supplied with: VacOil 19 oil, NW25 O-ring and centering ring, lifting plate.
Fomblin® must be purchased separately for PFPE pumps.
 

Technology

The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. 
  
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open. 
  
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.
 

Applications

  • Analytical instruments - LCMS
  • Automotive
  • Beam lines and high energy physics
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gas bottle filling/emptying
  • Gel drying
  • Glove boxes, ovens
  • Laboratory bench top vacuum
  • Lasers, gas recovery and re-circulation
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Refrigeration manufacture
  • Rotary, centrifugal evaporators
  • Solvent recovery
  • Surface science instruments
  • Turbomolecular backing pumps

 

Features and Benefits

  • The pump is designed for reliable, long-term operation.
  • Thermal overload device prevents overheating (single phase only).
  • The pump is a free-standing unit.
  • The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
  • The motors are totally enclosed and are cooled by the motor-cooling fan.
  • Easy to use controls.
  • Pressure die cast oil box with integral oil seals prevents oil leaks.
  • Gas ballast valve for large water vapour handling capacity.
  • Externally approved to EN61010, CSA, C22.2 and UL61010.
  • Oil distribution valve.
  • Pumping chambers are air-tight.
  • Oil sight-glass, two oil drain-plugs, inlet-port and outlet nozzle all fitted as standard.
  • Gas-ballast control.

 

Technical Data

Displacement (swept volume)  
50 Hz 32.2 m3h-1 / 19 ft3min-1
60 Hz 38.9 m3h-1 / 22.3 ft3min-1
Speed (Pneurop 6602)  
50 Hz 27.5 m3h-1 / 16.2 ft3min-1
60Hz 33.0 m3h-1 / 19.5 ft3min-1
Ultimate vacuum (total pressure)  
without gas ballast 1 x 10-3 mbar / 7.5 x 10-4 Torr
with gas ballast 1.5 x 10-2 mbar / 1.1 x 10-2 Torr
with Fomblin® 1 x 10-2 mbar / 7.5 x 10-3 Torr
Inlet connection NW25 flange
Outlet connection* Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole
Max allowed pressure at outlet 0.5 bar gauge / 7 psig
Max inlet pressure for water vapour 30 mbar / 23 Torr
Max water vapour pumping rate 0.7 kg h-1
Operating temperature range 13 – 40 °C
Nominal rotation speed 1440 / 1720 rpm
Motor power 50 Hz 0.75 kW
Motor power 60 Hz 0.90 kW
Power Connector 1-ph** IEC EN60320 C19
Weight 44 kg / 97 lbs
Noise 57 dB(A) @ 50 Hz
Oil capacity - max 1.5 litre
Oil capacity - min 1.2 litre
Recommended oil (supplied) Ultragrade 19

* The PFPE are supplied with NW25 outlet connection
** Pumps listed with IEC connector only
 

Product Videos

VacOil - How to Change Vacuum Pump Oil 01:54

Best practices to change vacuum pump oil on a two stage rotary vane vacuum pump. VacOil - Premium Vacuum Fluids www.vacoil.com

  • VacOil - How t...
    Best practices to change vacuum pump oil on a two stage rotary...

Warranty Information

6 Month Manufacturer Warranty

Find Similar Products by Tag

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category